Services Details

Home / Mechanical Testing

Order Services

Concrete Mix Design
Mechanical Testing
Chemical Testing
Non Destructive Testing
Geotechnical Investigation
Highway Engineering
Mechanical Testing Of Structural Steel

CONCRETE CUBE
Particulars Sample size
required		 Reference IS Code Time Frame
Compressive Strength of Cube
3 Nos.
IS 516
1 days
Compressive strength by accelerating curing per set
3 Nos.
IS 9013
1 days
CONCRETE CORE
Particulars Sample size
required		 Reference IS Code Time Frame
Compressive Strength of Cylinder
1 No
IS 516
3 Days
CONCRETE BEAM
Particulars Sample size
required		 Reference IS Code Time Frame
Flexural Test on Concrete beam
3 Nos.
IS 516
1 Days
Rapid Chloride Permeability Test (per set)
3 Nos.
ASTM C1202
1 Days
SOLID BLOCK
Particulars Sample size
required		 Reference IS Code Time Frame
Dimensions
20 Nos.
IS 2185
1 Day
Compressive strength of masonry block
8 Nos.
IS 2185
1 Day
Water absorption of masonry block
3 Nos.
IS 2185
1 Day
PAVEMENT BLOCK
Particulars Sample size
required		 Reference IS Code Time Frame
Water absorption
3 Nos.
IS 15658
3 Days
Compressive strengh
8 Nos.
IS 15658
2 Days
Flextural Strength / Breaking load
8 Nos.
IS 15658
3 Days
Abrasion resistance
9 Nos.
IS 15658
4 Days
Tensile Splitting Strength
8 Nos.
IS 15658
3 Days
AUTOCLAVED AEARATED CONCRETE BLOCKS (AAC)
Particulars Sample size
required		 Reference IS Code Time Frame
Compressive strengths
12 Nos.
IS2185Part III
3 Days
Density of the blocks
3 Nos.
IS2185Part III
3 Days
Drying Shrinkage
3 Nos.
IS2185Part III
10 Days
Dimensions
21 Nos.
IS2185Part III
1 Days
CELLULAR LIGHT WEIGHT CONCRETE (CLC)
Particulars Sample size
required		 Reference IS Code Time Frame
Compressive strengths (per block)
8 Nos
IS2185 III
3 Days
Density of the blocks
3 Nos
IS2185 III
3 Days
Water absorption
3 Nos
IS2185 III
3 Days
Brick Test ( Burnt Clay & Fly ash )
Particulars Sample size
required		 Reference IS Code Time Frame
Water absorption
5 Nos.
IS 3495: (pt.1 to 4) , IS 12894(2002)
3 Days
Compressive strengh testing
5 Nos.
IS 3495: (pt.1 to 4) , IS 12894(2002)
6 Days
Efflorescence Test.
5 Nos.
IS 3495: (pt.1 to 4) , IS 12894(2002)
5 Days
Dimension analysis
20 Nos.
IS 3495: (pt.1 to 4) , IS 12894(2002)
2 Days
Density Test
5 Nos.
IS 3495: (pt.1 to 4) , IS 12894(2002)
2 Days
NATURAL BUILDING STONE
Particulars Sample size
required		 Reference IS Code Time Frame
Wet Compressive Strengt Dressing and testing
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
-
Specific gravity and water absorption
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
3 Days
Porosity
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
3 Days
Density of Rock
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
3 Days
Sample praparation charges of mechanical properties
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
-
Petrography
4 to 6 boulders of approximate 200mm diameter.
IS 1121 : Part I:, IS 1122 : IS 1124
-
HYDRAULIC CEMENT
Particulars Sample size
required		 Reference IS Code Time Frame
Standard Consistency per sample)
Sealed Bag 50 Kg
IS 4031(part 4)
1 day
Fineness by Blain's Air permeability
Sealed Bag 50 Kg
IS 4031(part 1)
2 days
Soundness by Le Chatelier's Apparatus
Sealed Bag 50 Kg
IS 4031(part 3)
2 day
Soundness by Autoclave Method
Sealed Bag 50 Kg
IS 4031(part 3)
2 days
Initial and final setting time
Sealed Bag 50 Kg
IS 4031(part 5)
2 days
Standard Consistency per sample)
Sealed Bag 50 Kg
IS 4031(part 4)
1 day
Specific Gravity of Cement
Sealed Bag 50 Kg
IS 4031(part 11)
1 day
Compressive strength - 3 days)
Sealed Bag 50 Kg
IS 4031(part 6)
3 days
Compressive strength - 7 days
Sealed Bag 50 Kg
IS 4031(part 6)
7 days
Compressive strength - 28 days
Sealed Bag 50 Kg
IS 4031(part 6)
28 days
PULVERISED FUEL ASH
Particulars Sample size
required		 Reference IS Code Time Frame
Consistency
Sealed Bag 30 Kg
IS 1727
1 day
Fineness Blaine Air permeability
Sealed Bag 30 Kg
IS 1727
2 days
Fine ness by dry sieving
Sealed Bag 30 Kg
IS 1727
1 day
Finness by wet sieving
Sealed Bag 30 Kg
IS 1727
2 days
Soundness by Le Chatelier's Apparatus
Sealed Bag 30 Kg
IS 1727
2 days
Consistency
Sealed Bag 30 Kg
IS 1727
1 day
Soundness by Autoclave
Sealed Bag 30 Kg
IS 1727
2 days
Initial and final setting time
Sealed Bag 30 Kg
IS 1727
2 days
Specific gravity
Sealed Bag 30 Kg
IS 1727
1 day
Lime Reactivity
Sealed Bag 30 Kg
IS 1727
12 day
Compressive strength - 7 days
Sealed Bag 30 Kg
IS 1727
7 days
Compressive strength - 28 days
Sealed Bag 30 Kg
IS 1727
28 days
Residue on 45 micron IS sieve (gm)
Sealed Bag 30 Kg
IS 1727
1 day
GYPSUM AND PLASTER OF PARIS
Particulars Sample size
required		 Reference IS Code Time Frame
Consistency
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
1 day
Setting time
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
1 day
Compressive strength(5 cubes each )1 & 7 days
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
10 days
Loose bulk density
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
1 day
Transverse Test (Flexural test)
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
1 day
Dry Sieving
Sealed Bag 30 Kg
IS 2542 : Part 1 : Sec 1 to 12 , IS 2542 : Part II : Sec 1 to 8, IS 2547 : Part I, IS 2547 : Part II :
1 day
FINE AGGREGATE ( NATURAL AND CRUSHED SAND)
Particulars Sample size
required		 Reference IS Code Time Frame
Sieve analysis& fineness modulus
50 kgs.
IS 2386 (I)
1 day
Silt Content (Natural sand)-Wet basis
50 kgs.
-
-
Material Finer than 75 Micron
50 kgs.
IS 2386 (II)
2 days
Specific gravity and water absorption
50 kgs.
IS 2386 (pt.III )
3 day
Bulk density
50 kgs.
IS 2386 (pt.III )
1 day
Moisture Content
50 kgs.
IS 2386 (pt.III )
1 day
COARSE AGGREGATE
Particulars Sample size
required		 Reference IS Code Time Frame
Sieve analysis
100 kgs.
IS 2386 (I)
1 day
Specific gravity and water absorption
100 kgs.
IS 2386 (III):1963
3 days
Bulk density
100 kgs.
IS 2386 (pt.III ) 1963
1 day
Flakiness Index
100 kgs.
IS 2386 (pt. I ) 1963
2 days
Elongation Index
100 kgs.
IS 2386 (pt. I ) 1963
2 days
Crushing Value
100 kgs.
IS 2386 (pt.IV ) 1963
2 days
Impact Value
100 kgs.
IS 2386 (pt.IV ) 1963
2 days
10 % Fines Value
100 kgs.
IS 2386 (pt.IV ) 1963
2 days
Stripping Value
100 kgs.
-
-
Abrasion
100 kgs.
-
-
CERAMIC TILE TEST
Particulars Sample size
required		 Reference IS Code Time Frame
Dimension Analysis
10 Nos.
IS 13630 (pt.I) ):1993
2 days
Water Absorption
5 Nos.
IS 13630 (pt.II ):1992
2 days
Modulus of Rupture
7 Nos.
IS 13630 (pt.VI) :1993
2 days
Crazing Resistance
5 Nos.
IS 13630 (pt.IX ):1993
3 days
Scratch Hardness of Surface According to Mohs scale.
3 Nos.
IS 13630 (pt.13 ) 1993
3 days
For all tests as mentioned above
-
-
-
MOSAIC AND CHEQUERED TILES
Particulars Sample size
required		 Reference IS Code Time Frame
Water Absorption
6 Nos.
IS 1237 & IS 13801
2 days
Wet Transverse Test
6 Nos.
IS 1237 & IS 13801
2 days
Resistance to wear / Abrasion test
6 Nos.
IS 1237 & IS 13801
-
DOOR SHUTTER TEST
Particulars Sample size
required		 Reference IS Code Time Frame
End Immersion Test
One Full Door
IS 4020 (Part 1 to 16)
17 days
Knife Test
One Full Door
IS 4020 (Part 1 to 16)
1 day
Glue Adhesion Test
v
IS 4020 (Part 1 to 16)
2 days
Nail & Screw Holding Power
One Full Door
IS 4020 (Part 1 to 16)
2 days
PLYWOOD TEST
Particulars Sample size
required		 Reference IS Code Time Frame
Density & Moisture Content
One Full Panel
IS 1734
2 days
Adhesion Of Plies
One Full Panel
IS 1734
2 days
Nail & Screw Holding Power
One Full Panel
IS 1734
2 days
Water resistance test -(BWP grade)
One Full Panel
IS1734
10 days
Water resistance test -(BWR grade)
One Full Panel
-
-
Acidity and Alkalinity Resistance Test
IS1734
One Full Panel
10 days
Resistance To dry Heat
One Full Panel
IS1734
10 days
pH
One Full Panel
IS 3025 ( P 11 )
-
WOOD TEST
Particulars Sample size
required		 Reference IS Code Time Frame
Density & Moisture Content
6" X 6"X6" log.
IS 11215,IS 1708 : Parts 1 to 18
2 days
STEEL
Particulars Sample size
required		 Reference IS Code Time Frame
Wt/ mtr per bar
3 pieces of 1400 mm for
IS 1786,IS 1608 ,ISO 6892 ,IS 432
1 day
Tensile Strength
3 pieces of 1400 mm for
IS 1786,IS 1608 ,ISO 6892 ,IS 432
1 day
0.2% proff stress
3 pieces of 1400 mm for
IS 1786,IS 1608 ,ISO 6892 ,IS 432
1 day
Elongation
bar dia up to 25mm and 1600mm For 32mm diameter
-
1 day
90o/180o Bend Test
bar dia up to 25mm and 1600mm For 32mm diameter
-
1 day
135o/157.5o Rebend Test
bar dia up to 25mm and 1600mm For 32mm diameter
-
1 day
Total Elongation (In case of D & S steel grade)
bar dia up to 25mm and 1600mm For 32mm diameter
-
1 day

Connect Socially With CONSTROLOGIX :

Payment Partners :

All Rights Reserved © 2020 CONSTROLOGIX